Conduit Fittings, Imc/rigid/grd
2 Pack, 1-1/4" x 1", Zinc Plated Steel, Reducing Washer, For Use with Rigid/IMC Conduit, Used To Reduce The Size Of A Knockout On Sheet Metal Box, Enclosure Or Cabinet, Secured By A Pair Of Locknuts For Each Knockout, UL & CSA Approved, UPC Polybag.
2 Pack, 1" x 1/2", Zinc Plated Steel, Reducing Washer, For Use With Rigid/IMC Conduit, UPC Polybag.
1-1/4", One Hole Steel Strap, For Rigid/IMC Conduit, Zinc Plated Steel, 13 Gauge, Snap On Straps Provide Easy Mounting To Support Rigid & IMC Conduit As Required By The NEC, Straps Are Marked With Trade Sizes For Easy Identification.
1-1/2", One Hole Steel Strap, For Rigid/IMC Conduit, Zinc Plated Steel, 12 Gauge, Snap On Straps Provide Easy Mounting To Support Rigid & IMC Conduit As Required By The NWC, Straps Are Marked With Trade Sizes For Easy Identification.
2", One Hole Steel Strap, For Rigid/IMC Conduit, Zinc Plated Steel, 11 Gauge, Snap On Straps Provide Easy Mouting To Support Rigid & IMC Conduit As Required By The NEC, Straps Are Marked With Trade Sizes For Easy Identification.
1/2" Box Spacers, Die Cast Zinc, Use To Connect 2 Boxes Or Enclosures Side By Side, Or Back To Back, UL & CSA Listed. UPC Polybag.
2" Plastic Insulating Conduit Bushing, 105 Degrees Celsius Flame Retardant, Thermoplastic, Use To Provide A Smooth, Well Rounded Bearing Surface For Wires Or Cable At The End Of Threaded Conduit Or A Conduit Connector As Required By The NEC, UL & CSA Listed.
1-1/2" Plastic Insulating Conduit Bushing, 105 Degrees Celsius Flame Retardant, Thermoplastic, Use To Provide A Smooth, Well Rounded Bearing Surface For Wires Or Cable At The End Of Threaded Conduit Or A Conduit Connector As Required By The NEC, UL & CSA Listed.
1 1/4" Insulated Metallic Grounding Bushings, Tin-Plated Open-Type Lug, Dual Rated For CU-AL Conductors, Thermoplastic Liners Rated 105 Degrees Celsius, Die Cast Zinc, Used To Provide A Smooth, Well-Rounded Bearing Surface For Wires Or Cable At The End Of Threaded Conduit Or A Conduit Connector As Required By The NEC, Lay-In Type Lug Provides For Easy Attachment Of A Grounding Conductor, UL & CSA Approved.
1/2" Rigid To Rigid Corner Pull Elbow, Use To Facilitate Pulling Conductors Through A Shared Bend In A Run Of Threaded Rigid Conduit Or IMC, The Removable Cover Gives Ample Access So That Wire Pulling Can Be Achieved Without Obstructions.
3/4" Rigid To Rigid Corner Pull Elbow, Use To Facilitate Pulling Conductors Through Shared Bend In A Run Of Threaded Rigid Conduit Or IMC, Removable Cover Gives Ample Access So Wire Can Be Pulled Without Obstruction.
1/2" Rigid Offset Nipple, Die Cast Zinc, Use To Provide An Offset Connection Betweeen 2 Boxes, Cabinets, Or Enclosures.
3/4" Rigid Offset Nipple, Offset Die Cast Zinc, Use To Provide An Offset Connection Between 2 Boxes, Cabinets Or Enclosures, UL & CSA Listed.
1/2" Galvanized Rigid Conduit Coupling, Use To Join 2 Lengths Of Threaded Rigid Or IMC Conduit, UL Listed. UPC Polybag. UPC Polybag.
3/4" Galvanized Rigid Conduit Coupling, Use To Join 2 Lengths Of Threaded Rigid Or IMC Conduit, UL Listed. UPC Polybag.